...
The default fan speed profile is designed for a load size of 120g. This means its ‘reference load size’ is 120g. Do not change this if you are using the default fan profile. If you change this the BOOST system will apply incorrect fan speeds.
But if Reference load size is an expert setting.
If you are designing your own fan profile you are free to design for any load size. This The 'reference load size' setting lets the BOOST system know the load size you have designed for. For example, you might design a fan profile to work optimally with 80g. Enter a reference load size of 80. This means the BOOST feature will use the your fan profile unadjusted for a load of 80g, and will adjust the fan to run faster for 100g, 120g etc, or slower for 70g, 60g, etc.
When would you alter the
...
‘reference load
...
size’ of a profile?
If you have a profile that you know is designed for 100g or 80g, but you obtained it before ‘reference load size’ was available as a setting, you can edit the profile yourself in Kaffelogic Studio to ensure it has the correct 'reference load size' setting.
...