Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

  • Switch off the machine

  • Hold down the middle button (3rd button) and at the same time, switch on the machine

  • Machine will show a “Resetting” message, remove your finger. If you have an old version of the firmware and are updating this, The unit will say “Reflashing”

  • Machine will reset itself and default to the ‘K-logic Classic’ profile

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.