To install the latest firmware onto your roaster:
For USB (memory stick) units
Open the USB in Kaffelogic Studio
Click on the Firmware tab
Download the latest firmware version onto the USB
Click on the core profile tab and install a new set on the USB
Eject the USB
Switch off the roaster
Inset the USB into the roaster
Hold down the middle button (3rd button) and at the same time, switch on the machine
Machine will show a “Resetting” message, remove your finger. If you have an old version of the firmware and are updating this, The unit will say “Reflashing”
Machine will reset itself and default to the ‘K-logic Classic’ profile
For USB-C (cable) units
Open Studio
Plug your roaster into your laptop/computer using the included USB-C cable
Turn on your roaster and wait for it to sync with your laptop/computer
Click on the ‘Connect’ button
Click on the Firmware
Click on “install latest”
Wait for the roaster restart message to pop up and click “OK”
Wait for the roaster to restart and default to the ‘K-logic Classic’ profile
0 Comments