Re-format on-board memory

This is necessary whenever you get the message:

There is a problem synching with the roaster. (SYS ERR)

First try a safe re-format. In more extreme cases a complete re-format will be necessary.

Safe re-format (preserves logs and profiles):

1. Make sure you can access the Kaffelogic Studio connection tools menu. If it is not showing in the Tools menu, select Difficulty - Engineer in the Options menu.

2. Select ‘Re-format on-board memory’

3. Select ‘Re-sync’

The re-sync will copy all logs and profiles back onto the roaster.

Here is a step-by-step sequence of screenshots to guide you through the process: .

Complete re-format (CAUTION: deletes all logs and profiles):

1. Make sure you can access the Kaffelogic Studio connection tools menu. If it is not showing in the Tools menu, select Difficulty - Engineer.

2. Select ‘Re-format on-board memory’

3. Unplug the cable to the roaster

4. Select ‘Open roaster sync files’ and delete both logs and profiles folders.

5. Re-plug the cable to the roaster and restore the core profiles using the core profiles tab of Kaffelogic Studio