Page Comparison

To install the latest firmware onto your roaster: 

For USB (memory stick) units

1. Open the USB in Kaffelogic Studio 

2. Click on the Firmware tab 

3. Download the latest firmware version onto the USB

4. Click on the core profile tab and install a new set on the USB 

5. Eject the USB 

6. Switch off the roaster

7. Inset the USB into the roaster

8. Hold down the middle button (3rd button) and at the same time, switch on the machine

9. Machine will show a “Resetting” message, remove your finger. If you have an old version of the firmware and are updating this, The unit will say “Reflashing”

10. Machine will reset itself and default to the ‘K-logic Classic’ profile

For USB-C (cable) units

1. Open Studio

2. Plug your roaster into your laptop/computer using the included USB-C cable

3. Turn on your roaster and wait for it to sync with your laptop/computer

4. Click on the ‘Connect’ button

   

5. Click on the Firmware

6. Click on “install latest”

7. Wait for the roaster restart message to pop up and click “OK”

   

8. Wait for the roaster to restart and default to the ‘K-logic Classic’ profile